Highway Toll Stations Autoamtic Parking Barrier Gate with Double Limit Switch 2 Fence Arm GAT-P7 manufacturer from China SHENZHEN GOLDANTELL TECHNOLOGY CO.,LIMITED

Highway Toll Stations Autoamtic Parking Barrier Gate with Double Limit Switch 2 Fence Arm

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: GAT-P7

5 Million Operation Times Autoamtic Parking Barrier Gate with Double Limit Switch 2 Fence Arm

&n

5 Million Operation Times Autoamtic Parking Barrier Gate with Double Limit Switch 2 Fence Arm

Introduction of the Fence Parking Barrier Gate:
This equipment is controlled in wireless method, which makes its operation safe & convenient. What you need to do is to connect the equipment with 220V power supply and earth the exterior case; then the system could start working without any wire arrangement or matching.

The gate is equipped with multiple communication interfaces. It could be connected with vehicle-detector, IR co-irradiator or other accessories, to meet the safety requirement; and charging system could also be connected to realize automaitc management (optional).

Specification:

Type	Model: GAT-P7
Operation time	3s, 4s, 6s Customized
Arm Type	Straight Arm: Max 6 meters, Size 45×100mm and 45*80 mm aluminum alloy Fence Arm: Two or three fence arm, Max 4.5 meters, aluminum alloy Folding Arm: 90 or 180 degree folding arm, max 5 meters, aluminum alloy
Material	Galvanized sheet or Cold roll sheets, 2mm thickness, can be heavy duty Coated with epoxy paint for weatherproof protection
Size	3502801070mm
Spring And Bearing	Heat Treatment: more durable, more than 5 million times through operation testing
Rating Power	80W
Rating Voltage	AC 220V/110V±10%, 50/60HZ
Remote Control Distance	less than 50 meters
Packing Size	4203601060mm , strong carton case with cushion inside with air bubble film for protection,outside with a crate package
G.W	65 KG
Delivery	By Sea: big order(more than 100 sets), Cheap, suggested If urgent, can be delivery by Airplane or express
Payment	Sample: full payment Order: usually 30%-40% advance deposite, balance before shipment
Advantages	1. quick delivery time, 3-5 days for 50 sets after received advance deposite 2. 9 years OEM/ODM experience 3. quick response for handling problems
Application	Suitable for indoor as well as outdoor parking area at airport, shopping mall, warehouse,hotel, factories, condominium, car rental companies, etc. It can also be customized to beused together with any auto-pay ticketing parking or access control system

Common problems & solutions:

Common problem	Analysis	Solution
When motor running, the boom does not work.	1. the key-pin of main shaft of motor drops 2.bending-arm of mechanism part breaks-down	1. open the motor and refix the key-pin 2. dismount the mechanism part and replace the bending-arm
The arm vibrates during moving-down or reaching its horizontal position	1. Non-balance caused by weak spring tension; 2. Arm’s screws are loose; 3. The case is not fixed well.	1. replace the spring according to the Matching table of starndard spring or change hanging-hole’s position; or adjust the connection screw-rod of the spring to correct position; 2. fasten arm’s screws; 3. fasten the botls of the case;
The arm stops during movement.	1.wrong adjustment of limit switches 2.too much spring tension	1.check the connection of limit switches and correct; (see connection drawing fordetails) 2.replace the spring or change hanging-hole’s position;
Anti-collision fails	ground sensor or IR wire damages or wrong connection	Replace ground sensor or Irparts, correct the connection carefully according to the drawing;
The arm could not reach right position.	Wrong adjustment of limit switches	place the arm in horizontal orveritical position, adjust the photo-barrierto the middle of photoelectric switches till lightis on. Red light for reaching horizontal position; green light is for reaching vertical position;