Deluxe Straight Arm Advertising Boom Barrier Gate RFID Acess Heavy Duty Waterproof IP54 GAT-P46 manufacturer from China SHENZHEN GOLDANTELL TECHNOLOGY CO.,LIMITED

Deluxe Straight Arm Advertising Boom Barrier Gate RFID Acess Heavy Duty Waterproof IP54

Place of Origin:

Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: GAT-P46

Deluxe Straight Arm Advertising Boom Barrier Gate RFID Acess Heavy Duty Waterproof IP54 Advertising Boom Barrier

Deluxe Straight Arm Advertising Boom Barrier Gate RFID Acess Heavy Duty Waterproof IP54

Advertising Boom Barrier Specifications:

Model	GAT-P43
Working Temperature	-40+75
Voltage	220V±10%, 110V±10%, 50/60HZ
Rated power	80W
Relative humidity	≤90%
Remote control distance	≥30m
Net weight	58kgs
Speed	3S,4S, 6S
Max boom length	6 meters
Motor Rotational speed	1400rmp
Protection Degree	IP54

Model Selection and Differences:

Boom type	Boom Length(L)		Diameter of the spring(mm)	Note
Straight boom	6M≥L≥5M		5.5/4.5
	5M≥L≥4.5M		5.5	Dispatching 4.5
	4.5M≥L≥3M		4.5	Dispatching 4.5
Straight boom adhesive tape	5M≥L≥4M	4.5M≥L≥3M	5.5/4.5	Dispatching 4.5
	4M≥L≥3M	3.5M≥L≥3M	4.5	Dispatching 4.5
Folding boom	6M≥L≥5M		6.5/4.5
	5M≥L≥4M		5.5/4.5
	4M≥L≥3M		4.5
	Two fence boom	5M≥L≥4M	6.5/5.5
Fence boom		4M≥L≥3M	5.5/4.5
	Three fence boom	4M≥L≥3M	6.5/5.5
		3M≥L≥2M	5.5/4.5

Functions & Features:
1) Manual release
2) Machine core with compression spring, effectively avoids the accidents caused by spring breaking
3) Die-casting aluminum alloy motor, precision and good at thermal radiating
4) Motor cooling fan, solving the problem of heat-protection
5) Double safety limit switches (photoelectricity limit switch/motor memory sensor)
6) Reversing on obstacle
7) Auto-closing
8) Support the INFRARER PHTOCELL for anti-bumping function (optional)
9) Support the external and internal VEHICLE LOOP DETECTOR (optional)
10) Traffic light interface
11) Wire control (switch signal)/ Remote control (418MHZ)
12) RS485 communication module (optional)

Common problems & solutions:

Common problem	Analysis	Solution
When motor running, the boom does not work.	1. the key-pin of main shaft of motor drops 2.bending-arm of mechanism part breaks-down	1. open the motor and refix the key-pin 2. dismount the mechanism part and replace the bending-arm
The arm vibrates during moving-down or reaching its horizontal position	1. Non-balance caused by weak spring tension; 2. Arm’s screws are loose; 3. The case is not fixed well.	1. replace the spring according to the Matching table of starndard spring or change hanging-hole’s position; or adjust the connection screw-rod of the spring to correct position; 2. fasten arm’s screws; 3. fasten the botls of the case;
The arm stops during movement.	1.wrong adjustment of limit switches 2.too much spring tension	1.check the connection of limit switches and correct; (see connection drawing fordetails) 2.replace the spring or change hanging-hole’s position;
Anti-collision fails	ground sensor or IR wire damages or wrong connection	Replace ground sensor or Irparts, correct the connection carefully according to the drawing;
The arm could not reach right position.	Wrong adjustment of limit switches	place the arm in horizontal orveritical position, adjust the photo-barrierto the middle of photoelectric switches till lightis on. Red light for reaching horizontal position; green light is for reaching vertical position;